Specification clauses for Specification

Supply and laying of a semi-dry cement screed made with the SuperFluid i-GlooAdvance admixture, minimum thickness 4.0 cm, compressive strength >= 25 N/mm² at 28 days, compliant with UNI EN 13813. The screed is laid on a substrate cleaned and dampened beforehand, with an expanded polyethylene perimeter strip. Surface finished with straightedge and float. Curing as prescribed by the manufacturer.

Supply and laying of a self-levelling cement screed made with SuperFluid XP i-GlooAdvance technology, minimum thickness 3.0 cm, compressive strength >= 40 N/mm² at 28 days, compliant with UNI EN 13813. Flow class SF3. Pump-applied over a substrate pre-treated with a dedicated primer. Suitable for underfloor heating systems.

Supply and laying of a screed for underfloor radiant systems made with the SuperFluid WmK i-GlooAdvance admixture of high thermal conductivity (lambda >= 1.8 W/mK), minimum 3.0 cm above the pipe. Compressive strength >= 30 N/mm². Certified for underfloor heating and cooling systems to UNI EN 1264.

Supply and laying of permeable paving built with the i-glooDrain ADD system, permeability >= 71 l/sec·m², thickness 10-15 cm. Washed 4-8 mm aggregate, controlled w/c ratio. Compliant with CAM requirements for permeable surfaces. Free-draining granular sub-base.

Supply and laying of lightweight cellular screed made with the i-glooCell LIGHT+ foaming agent, density 400-600 kg/m³, thickness as per design. For infills, falls and thermal insulation. Compressive strength >= 1.5 N/mm² for the 500 kg/m³ density class.